Check out these Ways to Breathe New Life into the Old Wood Windows

Restoration of old windows is an art. It adds a character to your space. Repairing over replacing old windows may sound a tough and hectic task to some people. But let me tell you that window restoration is an ideal option over replacing them until the windows are functioning well. 

Suppose you can restore old windows, then why not? Conserve the charm of old wood windows with just the implementation of a few methods. Wood is considered the best material for windows and window frames. It is rugged, solid, and durable for a long lifespan. However, wood is a naturally durable material that shields your home under any weather. Follow all the necessary prevention to secure it from damage. Go through these listed points to perform old window restoration of your home windows. 

  1. Perform a Regular Maintenance Check on Windows – The most straightforward approach to repairing or restoring old windows is to take action while there is nominal decay, damage, or paint and stain issues. If you detect the problem early, it will spare you the hassle of removing the windows from their frames and replacing the window coatings later. Include window inspections in your regular house maintenance, which will help keep a regular update about the windows’ conditions. Check weather stripping, paint, stain, glass, and lifting mechanisms frequently to avoid succumbing to climate and nature’s unavoidable ravages.
  1. Apply a Fresh Coat of Paint on the Wooden Frames When It Is Required – Often, rather than the frame itself, the paint will fail when a window looks to be breaking apart. Paint is the first line of shield for protecting a surface. Thus, if the paint on your windows flocks off, it’s time to sand, fix, prime, and paint them. Take a close, hard look at the adjoining siding or roofing while you’re repairing or maintaining the window frames to be sure you’re avoiding more damage. In addition, damaged paint can frequently be a sign of moisture encroachment from somewhere else. Thus, it is essential to take necessary precautions to eradicate this issue. 
  1. Repair the Decomposed area of Wooden Frame- A significant problem is decomposing window frames if your home has wooden windows. In many cases, it is more cost-effective and ecologically suitable to selectively repair the wooden window where it has been harmed rather than replace the entire frame. Pay close attention to the upper edges and bottom sash during your inspections, as they are more likely to be exposed to moisture and sunlight. A local carpenter will be able to assist you in replacing the parts if the wood is too damaged to be repaired by yourself. Apart from this, if you want and have a sufficient budget to replace the whole window frame, you can also do that. It’s entirely your call. 
  1. Keep a Check on the Seals of Windows for Avoiding Leakage Issues – Your windows may be leaking if your home feels abnormally draughty. For a variety of reasons, a leaking window seal might be problematic. Not only will it allow in the blazing summer heat and the bitterly cold winter air, but it might also hint that you must go outdoors and perform regular maintenance to protect yourself from the weather. The structure of old wood windows consists of a particular putty material which needs regular paint and leakage prevention coat. Although functional for its intended usage, the glazing degrades with time due to exposure to the elements, including wind, rain, and sunlight. Therefore, if you live in an area with frequent weather changes, aim to paint the exterior of old windows at least every five or eight years. 
  1. Prefer Hardwood Over Softwood for Window Repairs – Though we all know that wood is an ideal choice for window frames. While commencing the window repairing work, make sure that you pick hardwood because hardwood is ahead of softwood. Compared to hardwood, softwood expands and contracts with the change in the climate. As a result, it starts decaying more rapidly than hardwood. Thus, it would help if you preferred to use hardwood as your first option.  
  2. Change Old Ropes and Pulleys of the Windows – A sizable piece of lead is fastened to the pulleys and ropes inside and along conventional wood windows’ sides. The technique works well, but the strings eventually degrade and crack. Nevertheless, old windows can be kept operating longer by changing the rope or replacing the pulley. These elements should be accessible through a knockout panel repressed in the window frame.

To Wrap Up – In a nutshell, it can be concluded that it is vital to maintain the old wood windows otherwise they can rapidly fall into ruin. As we all know that wood windows possess a certain elegance and warmth to your home. Old wood windows can ultimately disintegrate from moisture and mold damage, luring termites, beetles, and other pests that love to eat wood. Eventually, it will harm your entire wooden window. Old windows need outside coatings to be healthy in the long run. The points discussed above are necessary to keep in mind to ensure the long run of the wooden windows.

Advertisement

How to Repair Metal or Fibreglass Window Screens?

Due to different climate and maintenance conditions, window screens may get damaged with time. Therefore, replacing the whole window, again and again, is something not adequate for your pocket. Old window restoration is a perfect option rather than replacing the whole window with a new one. 

Replace the old window screen. Fibreglass and metal screen frames are easy to put in a new set with the help of a few tools. The wooden frame is a little more complicated than the other two options, but it is the best for a long-term investment. 

Here is an approach for window screen replacement and repair by following simple steps for replacing a Metal or Fibreglass window screens. Follow the instructions carefully for perfect fitting of the screen. 

  • A rubber seal, spline rolling tool, and a screen. Purchase big rolls of screen sheets and cut them down into the required measurements. 
  • Take out the screen frame from your window. Then, use a screwdriver or a hammer to bring the screen frame out. 
  • Lay the screen on a flat surface to efficiently work on it.
  • Take out the screen by pulling up the rubber spline. Pry it up with the help of a screwdriver and then pull the screen out. 
  • Once the spline is out, you can quickly bring out the screen now. 
  • Lay down the roll of the new screen on a flat surface. Then, cut out the new section of the screen to place it in the frame.
  • While cutting the screen, leave some extra inches on both sides of the screen sheet. These additional inches will help you if any mistake occurs. 
  • Use stop blocks or wooden pieces to hold the screen’s frame in place. 
  • Use 2-4 clamps to hold the screen in a proper position. 
  • With the help of the convex end of the roller tool, make it run over the screen on the opposite sides of the clamps.
  • As soon as you roll down the screen in the frame, make sure there are no bubbles inside the screen. 
  • Never start from the center or randomly any side of the screen. Always start working from corner to corner. 
  • Now, with the help of the roller tool’s concave side, press the spline into the frame from the edges. 
  • Complete this step slowly as rushing can wrest the screen inwards, which should not happen. 
  • If you are using a fiberglass screen, in any moment of mishap, you can bring it out and start doing it again. But when it comes to aluminum, you have to commence with the very first step. So, be careful while applying the spline to the edges of the screen.
  • Repeat this step for all other sides of the screen and roll the spline without creating any wrinkles in the screen sheet. 
  • Cut the excess spline and put it into the corner with the help of a screwdriver. Finally, clean the screen with a dry cloth and complete the window screen replacement process.

BENEFITS OF RESTORING YOUR OLD WINDOWS!

Restoring old windows is something every one of us almost thinks about, but sometimes we actually don’t implement it. However, you should know that old window restoration introduces a new look to your windows and allows for more natural light.

The reason to restore your windows can not just include the fact that they are old but also welcoming new window technology to the home.

I have started a few benefits of old window restoration. Keep reading to find them out!

1) Increased home value:
Restoring your old window would increase your home value. It increases your house market value as you have upgraded your windows, adding to your house appearance.

Old window restoration ensures your home does not need any repairing, hence making it a fair deal for the buyers.

2) Reduced dust and allergens:
When you initiate the project to restore your old windows, you upgrade them as per the new windows. When you do that, the glass binds and shades of the window get changed too, and they play a key role in keeping the dust away. Thus, helping you keep the allergens away from the indoors efficiently.

3) Noise reduction:
With window restoration, you can cut off the loud noises from the exterior to a great extent. New windows will be fitted perfectly, and the material you’ll use to fit the windows will ensure that noises from outdoors are canceled.

4) Low-maintenance solutions:
Once you’ve restored your old windows, it’ll be easy for you to maintain them after that.

You can clean them on your own, and as old windows are gone, you can easily use them without worrying about them getting stuck, which can be an expense to get fixed.

5) Enhanced curb appeal:
With old windows replaced and new windows on the house, you can effortlessly increase your house’s beauty, both inside/out.

You can pick the type of window exterior that’ll go with your exteriors; this way; your windows play a role in enhancing your curb appeal.